Wednesday, March 30, 2011

Particle in one Dimensional Box

The Particle in a One-Dimensional Box:

The particle in a one-dimensional box model is one of the simplest models for electron behavior. In this model, the role of quantization becomes important in determining the energy eigenvalues of the electron. A situation is considered in which an electron is allowed to move along an arbitrary spatial dimension, one can use the x-axis. The x-axis is divided into three regions, I, II, and III where {I | x<0}, {II | 0L}.

In regions I and III, an infinite potential energy barrier is present. The potential energy of any particle within these regions becomes infinite, meaning in order to exist there, the particle's total mechanical energy must be infinite. Since this will never be true, the particle cannot exist within regions I and III, it is restricted to region II. From this, one knows that the wave function of the electron must be zero everywhere except for {0 < x < L}. Also, remembering that all wave functions are continuous, one knows that the wave function at x=0 and at x=L must be zero; otherwise a discontinuity would occur. The goal presently is to determine the set of possible wave functions associated with the electron, and then to use such to determine the energy eigenvalues. To begin, one looks to the time-independent Schrödinger Equation (the time-dependent form is not necessary since the state of the electron and its surroundings are constant).

eq.1

Notice, the potential energy term is neglected. To begin solving for the wave function set, one must rearrange this into the form:

eq.2

To do so, one multiplies eq.1 by - 2m / h-bar2:

eq.3

The general trigonometric solution to this second-order differential equation is:

eq.4

The generalized wave function set for the electron has now been determined. Now to determine the energy eigenvalues associated with these wave functions. To begin, one looks at the right end point of the one-dimensional box, at x=L. Knowing the wave function is zero at this point, one can write:

eq.5

The sine function produces an output of zero when its input values are multiples of pi:

eq.6

where n is member to the natural number set {1,2,3,...}. The number n is called a quantum number, a number which determines the particular state that the electron occupies. One can write an alternate form of the wave function using eq.6:

eq.7

Normalizing the wave function as described in the section concerning operator mechanics is relatively straight-forward:

eq.8

Rewriting eq.7:

eq.9

Graphically demonstrating the wave functions for n=1,2,3,4:

Rearranging eq.6 to isolate energy:

eq.10

The unusual aspect of this model is that the energy of the electron is quantized. Only a discrete set of values is allowed as opposed to a continuous spectrum of values. This quantization phenomenon is the effect of imposing barriers. A minimum energy value is also present which is named the zero-point energy {E1 or h2/(8mL2)}. This originates from the quantum number n, which is an integer that is greater than or equal to one. If it were to be zero, the wave function would be zero for every value of x, meaning it would have zero mechanical energy, meaning it would have zero momentum, meaning a violation of the Heisenberg uncertainty principle would occur since the uncertainty of momentum would be zero while the uncertainty of position is nonzero.

Quantum mechanical operators

Operators in Quantum Mechanics

Associated with each measurable parameter in a physical system is a quantum mechanical operator. Such operators arise because in quantum mechanics you are describing nature with waves (the wavefunction) rather than with discrete particles whose motion and dymamics can be described with the deterministic equations of Newtonian physics. Part of the development of quantum mechanics is the establishment of the operators associated with the parameters needed to describe the system. Some of those operators are listed below.

It is part of the basic structure of quantum mechanics that functions of position are unchanged in the Schrodinger equation, while momenta take the form of spatial derivatives. The Hamiltonian operator contains both time and space derivatives.

Postulates of Quantum mechanics

Postulates of Quantum Mechanics

In this section, we will present six postulates of quantum mechanics. Again, we follow the presentation of McQuarrie , with the exception of postulate 6, which McQuarrie does not include. A few of the postulates have already been discussed in section 3.

Postulate 1. The state of a quantum mechanical system is completely specified by a function $\Psi({\bf r}, t)$ that depends on the coordinates of the particle(s) and on time. This function, called the wave function or state function, has the important property that $\Psi^{*}({\bf r}, t) \Psi({\bf r}, t) d\tau$ is the probability that the particle lies in the volume element $d\tau$ located at ${\bf r}$ at time $t$.

The wavefunction must satisfy certain mathematical conditions because of this probabilistic interpretation. For the case of a single particle, the probability of finding it somewhere is 1, so that we have the normalization condition

\begin{displaymath} \int_{-\infty}^{\infty} \Psi^{*}({\bf r}, t) \Psi({\bf r}, t) d\tau = 1 \end{displaymath} (110)

It is customary to also normalize many-particle wavefunctions to 1.2 The wavefunction must also be single-valued, continuous, and finite.

Postulate 2. To every observable in classical mechanics there corresponds a linear, Hermitian operator in quantum mechanics.
This postulate comes about because of the considerations raised in section : if we require that the expectation value of an operator $\hat{A}$ is real, then $\hat{A}$ must be a Hermitian operator. Some common operators occuring in quantum mechanics are collected in Table .


Table 1: Physical observables and their corresponding quantum operators (single particle)
Observable Observable Operator Operator
Name Symbol Symbol Operation
Position ${\bf r}$ $\hat{\bf r}$ Multiply by ${\bf r}$
Momentum ${\bf p}$ $\hat{\bf p}$ $-i \hbar \left( \hat{i} \frac{\partial}{\partial x} + \hat{j} \frac{\partial}{\partial y} + \hat{k} \frac{\partial}{\partial z} \right)$
Kinetic energy $T$ $\hat{T}$ $- \frac{\hbar^2}{2m} \left( \frac{\partial^2}{\partial x^2} + \frac{\partial^2}{\partial y^2} + \frac{\partial^2}{\partial z^2} \right)$
Potential energy $V({\bf r})$ $\hat{V}({\bf r})$ Multiply by $V({\bf r})$
Total energy $E$ $\hat{H}$ $- \frac{\hbar^2}{2m} \left( \frac{\partial^2}{\partial x^2} + \frac{\partial^2}{\partial y^2} + \frac{\partial^2}{\partial z^2} \right) + V({\bf r})$
Angular momentum $l_x$ $\hat{l}_x$ $ -i \hbar \left( y \frac{\partial}{\partial z} - z \frac{\partial}{\partial y} \right)$
$l_y$ $\hat{l}_y$ $ -i \hbar \left( z \frac{\partial}{\partial x} - x \frac{\partial}{\partial z} \right)$
$l_z$ $\hat{l}_z$ $ -i \hbar \left( x \frac{\partial}{\partial y} - y \frac{\partial}{\partial x} \right)$

Postulate 3. In any measurement of the observable associated with operator $\hat{A}$, the only values that will ever be observed are the eigenvalues $a$, which satisfy the eigenvalue equation

\begin{displaymath} \hat{A} \Psi = a \Psi \end{displaymath} (111)

This postulate captures the central point of quantum mechanics--the values of dynamical variables can be quantized (although it is still possible to have a continuum of eigenvalues in the case of unbound states). If the system is in an eigenstate of $\hat{A}$ with eigenvalue $a$, then any measurement of the quantity $A$ will yield $a$.

Although measurements must always yield an eigenvalue, the state does not have to be an eigenstate of $\hat{A}$ initially. An arbitrary state can be expanded in the complete set of eigenvectors of $\hat{A}$ ( $\hat{A} \Psi_i = a_i \Psi_i)$ as

\begin{displaymath} \Psi = \sum_i^{n} c_i \Psi_i \end{displaymath} (112)

where $n$ may go to infinity. In this case we only know that the measurement of $A$ will yield one of the values $a_i$, but we don't know which one. However, we do know the probability that eigenvalue $a_i$ will occur--it is the absolute value squared of the coefficient, $\vert c_i\vert^2$ (cf. section 3.1.4), leading to the fourth postulate below.

An important second half of the third postulate is that, after measurement of $\Psi$ yields some eigenvalue $a_i$, the wavefunction immediately ``collapses'' into the corresponding eigenstate $\Psi_i$ (in the case that $a_i$ is degenerate, then $\Psi$ becomes the projection of $\Psi$ onto the degenerate subspace). Thus, measurement affects the state of the system. This fact is used in many elaborate experimental tests of quantum mechanics.

Postulate 4. If a system is in a state described by a normalized wave function $\Psi$, then the average value of the observable corresponding to $\hat{A}$ is given by

\begin{displaymath} <A> = \int_{-\infty}^{\infty} \Psi^{*} \hat{A} \Psi d\tau \end{displaymath} (113)

Postulate 5. The wavefunction or state function of a system evolves in time according to the time-dependent Schrödinger equation

\begin{displaymath} \hat{H} \Psi({\bf r}, t) = i \hbar \frac{\partial \Psi}{\partial t} \end{displaymath} (114)

The central equation of quantum mechanics must be accepted as a postulate, as discussed in section

Postulate 6. The total wavefunction must be antisymmetric with respect to the interchange of all coordinates of one fermion with those of another. Electronic spin must be included in this set of coordinates.
The Pauli exclusion principle is a direct result of this antisymmetry principle. We will later see that Slater determinants provide a convenient means of enforcing this property on electronic wavefunctions.
Powered By Blogger